Date: August 04, 1992 Document: X3T9.2/92-134 Rev 1 To: ANSI X3T9.2 Committee (SCSI) From: Jeffrey L. Williams (HP) Steve Krupa (HP) Subject: Response to X3T9.2/92-111. (ASC/ASCQ for Data Compression) I would suggest an additional ASC/ASCQ as follows 11 0E CANNOT DECOMPRESS USING DECLARED ALGORITHM This would be returned in the case where the compressed data which a device is trying to decompress using the declared algorithm (either provided by the host via the Data Compression Mode Page or determined directly by the device from information contained within the format of the compressed data on the media) has a fault in it such that decompression is not possible. Page 1